ECOTEST PRD GUARDER DKG-24 Operating Manual page 29

2.3.3.6 DE measurement mode
Switching to the display mode of the accumulated dose is
carried out by pressing the "<", ">" buttons (depending on the
current operating mode of the device) (Figure 10).
Figure 10 - DE measurement mode
The window displays the accumulated dose and the time
since the device was turned on.
2.3.3.7 Device setting mode
To switch to the setup mode, press the "<", ">" buttons
(depending on the current operating mode of the device). Press
the ENTER button to make the settings window active.
The device setup mode includes the following items
(Figure 11):
• Display – backlight setup,
• Sound – setup of sound notifications and alarms,
• Vibro – setup of vibrating notifications and alarms,
• Light – setup of light notifications and alarms,
• Language – choice of data display language on the
device display,
• Location – setting the device's navigation receiver,
• Connectivity – setting communication interfaces with
external devices,
• Measurement – setting thresholds of the alarm
triggering and tracks saving,
• Time and date – time and date settings,
• Additional settings – setting the appearance of the
search screen and the type of batteries,
27