Table of Contents
Advertisement
After entering the required data and checking the fields to
be recorded with, click the "Save settings" button to save the
updated data to the device's memory.
• Threshold by dose – in this field, you can set the alarm
trigger threshold based on the accumulated dose. After entering
the desired value, click "Save".
2.3.3.8.6 PIN code change
To change the PIN code of access to "Spectra Reader"
SW and login as the "Administrator" in the device, click on the
"Change PIN code" button on the right side of the "Settings"
tab of the "Spectra Reader" SW's main window (Figure 29).
A field of the PIN code change opens featuring the following
fields (Figure 30):
• PIN code – enter the current access PIN code in this field;
• New PIN code – enter a new access PIN code in this
field;
Figure 30 – PIN code change
43
Advertisement
Table of Contents
