Table of Contents
Advertisement
2.3.3.8.3 Events reading
After launching the "Spectra Reader" SW, the "Events"
tab of the main window opens (Figure 26).
In the upper left corner of the "Events" tab, a serial number
of the connected device appears in the format "Serial number
XXXXXXXXX", where XXXXXXXXX is a unique serial
number of the currently connected device.
This tab also has the following fields:
• Events list – this field displays the list of events
downloaded from the dosimeter during the last readout session;
• Events filter – in this field you can select the type and
the date of events that will be displayed in the list after reading
from the device.
Click "Read events" to read all events stored in the
device's memory.
IMPORTANT! Even if not all types of events were
selected in the "Events filter" field, they still would be read
again each time until cleared from the device's memory.
Figure 26 – "Events" tab
39
Advertisement
Table of Contents
