Table of Contents
Advertisement
IMPORTANT! The option to configure "Current time" and
"Current date" parameters is available only after entering the
"Administrator" mode.
2.3.3.7.10 Additional settings
The "Additional settings" item contains the following
settings (Figure 23):
Figure 23 –Additional parameters setup
• Search window – allows you to choose one of the operating
modes: displaying the intensity histogram by the gamma channel or
displaying the search diagram.
• Battery type – allows selection of the battery type. The
device supports lithium, alkaline and nickel metal hydride batteries.
IMPORTANT! For the correct display of the battery level,
you need to make sure that the value of the "Battery type"
parameter corresponds to the type of installed batteries.
2.3.3.7.11 About device
The item "About device" contains information about the
model of the device, version of its proprietary software, version of
the board, serial number, as well as information about the
manufacturer of the device (Figure 24).
Figure 24 – About device
36
Advertisement
Table of Contents
