Table of Contents
Advertisement
2.3.3.8 Data communication with personal computer
2.3.3.8.1 Installation of software
To read and review the events from the device and setting its
parameters use the "Spectra Reader" software (hereinafter "Spectra
Reader" SW), which is supplied by the device's manufacturer.
IMPORTANT! You need to know the password to log in as
"Administrator" to use the "Spectra Reader" SW. It is common
for operation with the dosimeter and this SW.
To realize the option of data communication of the dosimeter
and the PC you first need to install the driver supplied by the
device's manufacturer.
After installing the driver, you have to install the "Spectra
Reader" SW.
Installation of drivers and "Spectra Reader" SW is similar to
installing other applications and does not require any special skills.
IMPORTANT! Smooth operation of "Spectra Reader" SW
requires installation on the PC of the OS Windows 7 and higher. To
install the driver and "Spectra Reader" SW you might need to login
in the OS of your PC as the "Administrator". In case of
complications, please contact your system administrator who
supports your PC.
2.3.3.8.2 Establishing data communication with PC
Connect the device to the PC with a USB cable. If the device
was turned on, it will automatically turn off and enter charging mode.
To switch to data communication mode with a PC, it is necessary to
launch the "Spectra Reader" SW (via a link on the Desktop or
through the "Start" menu), after which the "Spectra Reader" SW
login window will appear, which contains the following fields
(Figure 25):
• COM port – selection of the COM port to which the device
is connected;
• PIN code – entering the PIN code for entering the program
(default is "1111").
37
Advertisement
Table of Contents
