Table of Contents
Advertisement
To change the settings in the "Display", "Location" and
"Additional settings" items, use the "<", ">" buttons to move
the cursor up or down until the desired parameter is selected,
then press the ENTER button to confirm the selection. After that,
use the "<", ">" buttons to set the required value or unit of
measurement. Next, you need to press the ENTER button to
return to the selection of other parameters of the corresponding
item.
To change the settings in the "Measurement" and "Time
and date" items, use the "<", ">" buttons to move the cursor up
or down until the desired parameter is selected, then press the
ENTER button to confirm the selection. After that, use the "<",
">" buttons to set the desired value or unit of measurement and
press the ENTER button to move to another digit. After setting
the values in all digits, press the ENTER button to return to the
selection of other parameters of the corresponding item.
Each item of the setup menu contains icons
(except for the "Device info" item) and
responsible for saving the settings and returning to the previous
menu without saving the settings, respectively. To select the
desired icon, use the "<", ">" buttons to move the cursor up or
down until this icon is selected, then press the ENTER button to
confirm.
2.3.3.7.1 Display
"Display" item contains the following settings (Figure 12):
Figure 12 – Display parameters setup
29
, which are
Advertisement
Table of Contents
