Streaming And Broadcasting - OSEE GoStream Deck User Manual

Panel Layout and Device Features
Set a playback mode for the recorded videos in SD card as Play Once,
Repeat or Sequential. (PlayBack→playback→Playback Mode).
 Refer to "5.1.15 PlayBack Settings" for details about Playback Mode setting.

4.1.3.22 Streaming and Broadcasting

GoStream Deck provides direct streaming via Ethernet connection or streaming via
the webcam output (USB1). The former one sets up a direct stream via your
switcher's internet connection which uses a build-in streaming generator without the
need for a computer, so you don't need to use any complicated software to get started.
The latter one will be recognized as a webcam via the streaming software which is
installed in your external broadcast computer, and you must choose the switcher as
webcam in the streaming software such as Open Broadcaster for streaming, that will
broadcast your switcher's video and audio.
Here's how to stream:
Method 1: Direct streaming via Ethernet
Connect GoStream Deck to Ethernet via Ethernet connector, select what
streaming service you intend to use and enter the streaming key in the STREAM
menu. Once you have completed this setup, you can simply press LIVE button to
go live!
Step 1 Connect to Ethernet
Connect GoStream Deck to Ethernet via Ethernet connector. It may take a
moment for DHCP to find the unit and assign an IP address.
Step 2 Get a streaming Key from the platform
Figure 4.1-73 Ethernet Connection
82