How To Use Audio Mixer - OSEE GoStream Deck User Manual

For example: The audio meter for In2 is shown in gray to indicate that its audio
will not be used, as neither of its ON or AFV buttons are enabled.
 MIC1 and MIC2 have no AFV function.
 You can adjust the audio level by the audio knob in AUDIO MIX area, or set the
audio menu item.
 Refer to "5.1.11 Audio Mixer Settings" for more details about the audio settings.

4.1.3.18 How to Use Audio Mixer

GoStream Deck provides an integrated audio mixer, including volume knob and
buttons to control the monitoring audio output behavior. It uses the embedded HDMI
audio from your cameras, media servers and other inputs without the need for an
external audio mixer. This saves space and makes low cost as you don't need
separate audio connections for each video source.
The audio source buttons are MIC1, MIC2, IN1, IN2, IN3, IN4 and AUX, as shown in
Figure 4.1-59. IN1, IN2, IN3, IN4 is corresponding to the embedded audio of HDMI1 to
HDMI4 respectively, MIC1 and MIC2 is corresponding to analog audio media
respectively, and AUX is corresponding to the embedded audio of the video source
coming from SD card.
PGM represents the mixed audio output using the other audio sources.
◼ Audio Mix-ON and AFV
Figure 4.1-59 Buttons in Audio Mix Area
Panel Layout and Device Features
69