Set Pattern Key - OSEE GoStream Deck User Manual

 About sample color: When sampling on screen, you should set Chroma
Key→control→Sample as Enable. After getting your sample color, make sure
you will set Chroma Key→control→Sample as Disable to shut down the color
sampling in order to close the sample image which is on the top layer.

4.1.3.13 Set Pattern Key

A pattern key is used to display a geometric cut out of one image on top of another
image. In a pattern key, the key or cut signal is generated using the switcher's internal
pattern generator. The internal pattern generator can create 18 shapes that can be
sized and positioned to produce the desired key signal.
Here's how to generate a circle pattern key:
◼ Background Source: a full screen image, the program output source in the
switcher;
◼ Fill Source: another full screen image you wish to overlay on top of the
background;
◼ Pattern: an internal pattern generator, set it as a circle;
The area of fill source defined in black by the selected internal pattern will be removed
from the fill source, and the left area of fill source will leave stacked on top of
background.
As shown in Table 4.1-4, you can select various transition patterns:
Figure 4.1-47 Pattern Transition Illustration
Panel Layout and Device Features
57