How To Record And Run A Macro - OSEE GoStream Deck User Manual

 Refer to "5.1.11 Audio Mixer Settings" for more details about the fader settings.
 Output audio level: the audio knob is used to increase or decrease the
audio level for the program output when no audio source is selected
currently, that is all the input audio sources are not pressed down.
 Audio source level: the audio knob is used to increase or decrease the
audio level for the respective source when only one audio source is
selected, that is the corresponding audio source is pressed down.
◼ Set audio parameters for each audio channel
In Audio Mixer menu, you can select the parameters for each channel by
selecting Audio Mixer→**channel, such as MIC1, MIC2 and so on.
◼ Audio Delay
Sometimes when using analog audio via MIC inputs, there may be a slight
difference in the sync between analog audio and video. Setting the audio delay
by setting Audio Mixer→ MIC1/ MIC2→ delay item will ensure the analog audio
input is perfectly synced with the video inputs.
◼ Set the audio output source
Use PHONE connector to monitor the switcher output, you can select a single
channel or the mixed channel. Set this parameter by Audio Mixer → monitor
→source item, and adjust its audio level by Audio Mixer→ monitor →level
item.
 The program output audio will be fading with fade to black operation by selecting
the AFV item in FTB menu.

4.1.3.19 How to Record and Run a Macro

A macro is an easy way to automate a sequence of switcher actions so you can
repeat the sequence at the press of a button. GoStream Deck provides up to 8 macro
buttons MEM1~MEM8, as shown in Figure 4.1-63:
Panel Layout and Device Features
73