Figure 4.1-60 On Button in Audio Mix Area
For example: Press IN1, and then press ON, thus IN1 will be mixed to the
audio program output. Press IN2, and then press ON, thus the audio
program output will be the mixed audio of IN1 and IN2.
AFV: turn the audio follows video on or off
AFV stands for 'audio follows video', that is, it will only let the audio input
be heard whenever the corresponding video source is switched on air.
To enable or disable AFV for each input, only available for IN1~IN4 and AUX,
not available for MIC1, MIC2.
ON: press and turn it on, the button is highlighted in white, it will let the audio
for the current input video which is on air be heard.
OFF: press it again to turn it off, the button is in gray.
◼ Switch input audio source
The audio sources in AUDIO MIX pane are MIC 1, MIC 2, IN1, IN2, IN3, IN4,
AUX, as shown in Figure 4.1-61.
Press the source button, and then press ON button to select this channel to
mixing audio output. The selected audio source button will be highlighted in white,
or it will turn gray.
Panel Layout and Device Features
71