Signal Sources - OSEE GoStream Deck User Manual

Panel Layout and Device Features
 The power button is illuminated in highlighted white during startup with its internal
light.

4.1.2.2 Signal Sources

Press a signal source button to switch PGM or PVW source.
In this area, the signal sources are divided into two areas including the background
sources of program bus and preview bus. The buttons in the first row are program bus,
and the second row are preview bus.
Each bus is composed of 8 background source select buttons: four channels of HDMI
inputs, two channels of still image, one channel of auxiliary signal from SD card or
USB connector(usually labeled as AUX in this text), and one internal black signal (also
could be set as Super Source- a splicing display), the buttons are as shown in Figure
4.1-3:
To switch among these sources, press any one of the buttons in PGM bus or PVW
bus.
◼ Program Bus Source Select Buttons (Program output, labeled as PGM)
Press a program bus source select button, and GoStream Deck will switch the
program output immediately. You can see the PGM window changing
immediately and no effect on the PVW window.
The program bus source select buttons are used to switch background sources
directly to the program output. The source currently on air is indicated by a button
that is illuminated red.
As shown in Figure 4.1-3, the source buttons labeled in the dotted red rectangle
are all background sources on program bus.
And you can monitor the current program video in the PGM window of multiview
display, as shown in Figure 4.1-4, the window labeled in red rectangle in Row2 is
the program source currently on air.
Figure 4.1-3 Source Select Buttons
14