OSEE GoStream Deck User Manual page 24

Panel Layout and Device Features
ON: When the input's audio is set to 'on', the input audio will be heard
permanently, even if the source is not currently on air. This button is highlighted in
white.
OFF: When the input's audio is set to 'off', the input audio will never be heard
even if the source video is on air. This button is in gray.
There is only one ON button in the Audio Mix area, but you can use it to match
with each audio source button to switch on or off the paired audio input.
In audio meter view, the tally is red when the audio channel is selected as ON,
and it is gray when the audio channel is selected as OFF.
◼ Audio Follows Video
AFV stands for 'Audio Follows Video'. Press it On, and it will only let the audio
input be heard whenever the corresponding video source is switched on air.
The button is available for IN1~IN4 and AUX.
There is only one AFV button in the Audio Mix area, but you can use it to match
with each audio source button to switch on or off the paired audio input.
In audio meter view, the tally is green when the audio channel is selected as AFV.
◼ Select Audio Source
It provides audio sources including MIC 1, MIC 2, IN1, IN2, IN3, IN4 and AUX.
Press an audio source button at first, then press ON to enable the corresponding
channel of audio source. The audio source button will be highlighted in white after
you press it.
Press MENU button followed by pressing an audio source button, it will pop up
the submenu of this audio channel directly, this is very helpful for setting the latest
audio channel you have selected.
◼ Adjust Volume
Rotate the volume knob in clockwise or counterclockwise to increase or decrease
volume output.
◼ Set Audio Parameters
Select Audio Mixer→**channel to set parameters for audio input and output.
◼ Audio Meter
The audio meter view is displayed at the right bottom of the multiview, as shown
in Figure 4.1-6. Each video source has an audio bar in this window, and you can
check its audio level.
The corresponding parameters for each audio channel bar could be set in Audio
Mixer menu. Refer to Audio Mixer menu for the details.
18