OSEE GoStream Deck User Manual page 73

Panel Layout and Device Features
as On, or you can press IN1 button in Audio Mixer area and then press ON button
as well.
Figure 4.1-56 Audio Meter Area
Set MIC input Type
2.
Set the mic input type to Mic, Mic+power or Line level audio.
Set the MIC input type by selecting Settings→*mic input→ Mic 1 Input/ Mic 2
Input items, as shown in Figure 4.1-57.
Figure 4.1-57 Mic Type Setting
Microphones typically have weaker signals compared to line type from other
audio devices. This means when mic (or mic+power) is selected, the input will be
boosted slightly to compensate. This also means that if mic is accidentally
selected when a line level input is plugged in, the audio will sound unusually loud.
If the audio sounds much louder than it should be, check that line is selected
instead of mic.
 Refer to "5.1.16 System Settings" for more details about the mic input settings.
67