Red highlight: normal streaming and communication;
Yellow highlight: normal communication, but data abnormal;
Yellow Flash: no communication;
Gray: no streaming.
Streaming Rate
4.
The data rate used by the quality setting will change depending on the video
standard your switcher is running at, and it could be set as Low, Medium or
High.
Set the streaming rate by Setting→quality→Streaming item, and set the output
video standard by Setting→output format→Format item.
For example: if you select high streaming quality and are running at 1080p30
then it would use the 6 Mb/s data rate, you can check this in Table 5.1-19.
Refer to "5.1.16.1Set Recording & Streaming Quality" for details about Streaming
Rate and output format setting.
5.1.15 PlayBack Settings
You can set the playback mode for the recorder files in SD card, the menu item is as
shown in Figure 5.1-21:
Figure 5.1-20 Streaming View
131
MENU OPERATIONS