Display Splicing-Super Source - OSEE GoStream Deck User Manual

 AUX view: the source for AUX could be the videos from SD card, or
webcam connected with USB2, select one by setting Setting→aux
source→source parameter.
 Audio Meter view: it provides a multiple-channel of audio level meter at
the right corner of the multiview display, plus streaming status, recording
time and free space in SD card.
 When pushing an upstream key or downstream key on air to PGM or PVW,
any one of the sources in the multiview which is used as the upstream key
or downstream key will be labeled as a colorful frame in the
corresponding color of PGM or PVW.

4.1.3.2 Display Splicing-Super Source

Super Source function allows you to arrange two to three designated sources on one
screen at one time, it appears as one single video source which can be assigned to
BLACK button.
◼ Active Super Source
Set the menu item Super Source →enable→ Enable to be On to activate the
super source function, this splicing display will be selected by BLACK button, as
shown in Figure 4.1-24:
Figure 4.1-24
◼ Set Signal Sources for Splicing Display
You could assign three signal sources as super sources, two for front signals, and
one for background signal. The two fronts could be superimposed onto the
background one.
 Front Source1: select Super Source →source→ Source1, source1 will
be spliced at the left of the splicing image;
 Front Source2: select Super Source →source→ Source2, source2 will
be spliced at the right of the splicing image;
 Background:
background source will be spliced at the base of the splicing image.
BLACK Button-as Supersource
select
Super Source
37
Panel Layout and Device Features
→source→
Background,