Panel Layout and Device Features
current program output;
ON AIR button is still in gray, and KEY button is highlighted in white.
Step 3 Perform cut transition
Press CUT button in the transition area to perform cut transition. First, the
background signal on program bus and on preview bus are exchanged.
Second, the upstream key is on air in current program output and off air in
the preview output;
ON AIR button is highlighted in red automatically, and KEY button is
highlighted in white.
Figure 4.1-53 Before and After Upstream Key Transition-Example2
◼ DSK button
You can perform downstream key transition by ON AIR button or KEY button, as
64