OSEE GoStream Deck User Manual page 81

Step 4 Set the target preview output
Press STILL1, the real target preview output after switching.
Step 5 Set a transition time
Press MENU button on the panel to load the main menu, then set the transition
time through scrolling the menu knob to select transition→ wipe → rate menu
item, and set it to be 3.
Step 6 Select a transition style
WIPE is already selected, so you must change in order to record. Make sure your
macro records the setting by selecting a different transition type, for example the
MIX transition, then clicking on WIPE again.
Step 7 Perform transition operation
Press AUTO button to transition automatically. The switcher will perform a
transition from IN1 to Still1 in wipe style.
Step 8 Completer recording
When completing all your switcher actions, press MEM1 button again to stop
recording this macro. The MEM1 button will be illuminated in highlighted white,
and the macro recording is done.
◼ Run macro
If your macro was successful, press the corresponding macro button, and the
macro will run immediately. You can easily see when a macro is running because
the macro button will flash in highlighted white.
 Refer to "5.1.13 Macro Settings" for details about macro parameters.
Figure 4.1-64 Sleep Time
75
Panel Layout and Device Features