OSEE GoStream Deck User Manual page 22

Panel Layout and Device Features
 Press a button with transition function, the source selected in the preview bus will
be sent to the program bus when the transition occurs. (BKGD is ON)
 Refer to "4.1.3.1 Display Multiview" for details on multiview display.
The buttons in signal sources areas are described as the table below. Press a
signal button, it will switch to this source immediately.
Button
Labeled
PGM
1 IN1
2 IN2
3 IN3
4 IN4
AUX AUX
BLACK BLACK
STILL STILL
STILL STILL
 The source select buttons for the program bus match the preview bus.
 Particularly, the default signal on BLACK button is an internal black signal, set the
menu item super source→enable to be ON, and it will display a splicing image
connecting to BLACK button.
Table 4.1-1 Signal Source Buttons
Button Description
PVW
IN1 Signal from HDMI1 connector
IN2 Signal from HDMI2 connector
IN3 Signal from HDMI3 connector
IN4 Signal from HDMI4 connector
Internal media played. You can set this source via
AUX Settings→aux source→ Source as Sd card or
Usb camera.
The internal black signal. Or you can set a
BLACK splicing display on this button through Super
Source menu.
Load a still graph as signal.
STILL
Set still1 in Still Generator menu.
Load a still graph as signal.
STILL
Set still2 in Still Generator menu.
16