OSEE GoStream Deck User Manual page 74

Panel Layout and Device Features
Set Audio Input Level
3.
Set the audio level fader to set the gain on the audio level for each audio source
in case of audio distortion.
A green number represents low to medium audio level, and the red number
represents high close to maximum 0dB. Once the level reaches 0dB, the audio
will clip. Clipping means the audio will distort, thus you should reduce the audio
level to avoid audio distortion.
Set it by selecting Audio Mixer→*audio channel→Input.
Tally Indicator
4.
The audio tally indicators are displayed as little rectangles at the top of each
audio level bar, as shown in Figure 4.1-58.
The audio tally light will be lit in red when the Enable item of the audio channel is
set to ON. Then if the corresponding video is the program and its AFV is set to
ON, the tally light will highlight in green.
Tally Color Comment
Gray
Red
Green
Figure 4.1-58 Tally for Each Audio Source
Audio source is not used, and
neither of its ON or AFV buttons
are enabled.
Audio source is currently on air,
the audio channel's Enable item
is set to ON.
AFV is selected, and its video
corresponding to
channel is currently program.
Status of button or menu
ON button is off
Or menu item Enable=off
ON button is on
Or menu item Enable=on
AFV=ON
this audio
Or Enable = AFV
68