Chapter 3 Unpack And Installation - OSEE GoStream Deck User Manual

Chapter 3 Unpack and Installation

Unpack:
When unpacking the components of GoStream Deck, please verify that none of the
components listed in Table 3.1 are damaged or lack. If there is any missing, contact
your distributors or Osee Technology Ltd. for it.
No. Item
1 GoStream Deck
2 Power cord
3 Quick Start Guide
4 Service Card
Installation:
Prepare for installation
1.
Please follow the procedures below before installing GoStream Deck:

Check the equipment for any invisible damage that may have occurred during
transit.

Confirm all the items listed on the packing list have been received.

Remove all the packing material including electrostatic-resistant packing.

Retain these packing materials for future use.
Mount a GoStream Deck in your desired location. Adequate ventilation
2.
is required when installed to prevent possible damage to the GoStream
Deck.
Connect required cables for signal input and output.
3.
Connect 12VDC using the power cord.
4.
Connect the power cord to the power interface.
5.
Fasten the power protect accessory.
6.
As a final step, turn on the device by pressing the corresponding power
7.
button located on the front panel.
Table 3-1 Packing List
7
Unpack and Installation
Quantity
1
1
1
1