OSEE GoStream Deck User Manual page 65

screen.
◼ Set Key button as PIP: set Key Type →type as PIP.
◼ Set signal source for PIP: select PIP→source→PIP item.
◼ Set frame size of PIP: select PIP→size/position→PIP size item.
◼ Set frame position of PIP: select PIP→size/position→X Position/Y Position
item.
◼ Set frame width of PIP: select PIP→border→Width item.
◼ Set frame color: select PIP→color→Hue/Saturation/Brightness items.
Here's how to generate the above PIP key:
Step 1 Set the type of upstream keyer as PIP
Press MENU to display the main menu, and scroll the menu knob to select Key
Type→type→Type as PIP, KEY button will be assigned as PIP.
Step 2 Load PIP on air
Press KEY button to enable PIP on the preview output.
Step 3 Set PIP Source
Then set PIP source. Press MENU to display the main menu, and scroll the menu
knob to select PIP→source→PIP as In 1, In 2, etc.
Step 4 Set PIP Parameters
To refine the PIP key, adjust parameters for PIP, such as position, size, mask
settings, border color, etc.
 Refer to "5.1.7 PIP Settings" for more details about PIP parameters.
Figure 4.1-48 PIP Keyer
59
Panel Layout and Device Features