Table of Contents
Advertisement
Using Your Personal Workstation
Connecting SCSI Accessories
2. Make sure the SCSI accessory is terminated correctly—either
Figure 1-9
Terminating the SCSI Accessory
3. Connect the SCSI accessory to your Personal Workstation's external
Figure 1-10
Connecting the Personal Workstation to the SCSI Accessory
4. Refer to the manual provided with the SCSI accessory to learn how to
46
internally or by a terminating resistor (refer to the manual provided
with the SCSI accessory). See Figure 1-9.
68-pin SCSI connector with a shielded SCSI cable. See Figure 1-10.
install any software that may be necessary for using it.
SCSI accessory is
properly terminated
Chapter 1
Advertisement
Table of Contents
