Pre-Boot Checks; Table 3-2. Pre-Boot Messages - HP VISUALIZE A6034 User Manual

Troubleshooting Your Personal Workstation
Using HP MaxiLife to Diagnose Problems

Pre-Boot Checks

When you press your Personal Workstation's on/off button, HP MaxiLife
will check your system before it initiates the start-up sequence. You will
see one of the following messages on the LCD as these checks progress:
Table 3-2
Message
Error! Power supply
Error! Proc slot1 issue
Error! Socket Proc 1
Error! Socket Proc 2
Error! Power supply
Error! Vcache L2 error
Error! VCC CPU 2 error
Error! Memory error
Error! No DIMM
Error! DIMM devices
Error! No HW monitoring
Error! No Video
Error! Power
154
Pre-Boot Messages
Description of what to do
Check power supply and power cable
connections.
Check for processor in slot 1.
Check that a CPU or terminator is installed
in CPU slot 1.
Check that a CPU or terminator is installed
in CPU slot 2.
Check with your local HP Service
Representative.
Check processor 1 and 2 VRM installations.
Check processor 2 VRM installation.
Check memory installation.
Check memory installation.
Check that DIMMs installed are compatible.
Check with your local HP Service
Representative.
Check for system video card.
Check that the processor is installed
correctly.
Check that there is no VRM plugged in
adjacent to a processor slot terminator.
Chapter 3