Table of Contents
Advertisement
Figure 1-8
Using Your Personal Workstation
Connecting SCSI Accessories
Connecting SCSI Accessories
Your Personal Workstation is equipped with an Ultra 160/m SCSI card.
This section covers the connection of internal and external SCSI
accessories.
The Adaptec SCSI card is capable of connecting to Low-Voltage
Differential (LVD) SCSI devices (for example, Ultra2 and Ultra 160/m)
and Single-Ended (SE) SCSI devices (for example, Ultra SCSI, Fast
SCSI, SCSI-1, etc.). Examples of single ended devices include: DAT
drives, Scanners, and older hard disk drives.
Adaptec SCSI Card
Connector
Connector
1
Here is a description of connectors one through four as seen in Figure
1-8.
Connector 1
68-pin external connector for LVD SCSI devices
Connector 2
68-pin internal connector for LVD SCSI devices
Connector 3
68-pin internal connector for Wide SE SCSI devices
Connector 4
50-pin internal connector for Narrow SE SCSI devices
44
Connector
3
2
4
Connector
Chapter 1
Advertisement
Table of Contents
