Installing And Removing Accessory Boards; Figure 2-72 I/O Card Slots And Their Capabilities - HP VISUALIZE A6034 User Manual

Figure 2-72
NOTE
Opening Your Personal Workstation and Installing Accessories

Installing and Removing Accessory Boards

Your Personal Workstation has six I/O slots available for installing I/O
cards in that are AGP Pro and PCI compatible. See Figure 2-72.
I/O Card Slots and their Capabilities
Slot
Number
AGP Pro
5
4
3
2
1
Each of the I/O slots on the system board are keyed to allow for proper
installation of accessory cards. The exception is the AGP Pro card slot.
This slot is not keyed so that it can maintain the capability of supporting
3.3 volt AGP Pro cards.
Chapter 2
Installing and Removing Accessory Boards
32-bit PCI, 33 MHz, 5 V
32-bit PCI, 33 MHz, 5 V
64-bit PCI, 66 MHz, 3.3 V
64-bit PCI, 66 MHz, 3.3 V
AGP Pro
32-bit PCI, 33 MHz, 5 V
109