Table of Contents
Advertisement
POST Phase
When the POST (Power-On Self Test) sequence is initiated, any error
messages that the BIOS may issue are displayed on the LCD. See Table
3-3. Note that if POST issues several error codes, the last error code
given will be the one that is visible on the LCD.
Table 3-3
Message
Error! POST Error xx
Operating System Boot Phase
If no error message has been issued by the BIOS at this phase, the
operating system will boot up and the message shown in Table 3-4 will be
displayed.
Table 3-4
Message
HP VISUALIZE
Chapter 3
Troubleshooting Your Personal Workstation
Using HP MaxiLife to Diagnose Problems
POST Phase Message
Description of what to do
Wait for the last POST error message and press ↵.
You can step through the error codes until you
find the one that matches yours. A description of
the error and what to do will be given.
Operating System Boot Phase Message
Description of what to do
No errors occurred.
155
Advertisement
Table of Contents
