Table of Contents
Advertisement
Table 3-5
Message
Error! Processor Temp
Error! PCI Fan
Error! System Fan
Error! POST Error xx
Main Menu
HP MaxiLife can also be configured to:
• Display the configuration details of your Personal Workstation
required to obtain support (see the section "System Info.").
• Indicate POST (Power-On Self Test) steps during the power-on phase
(see the section "Boot Steps").
• Perform diagnostic tests on your Personal Workstation's various
hardware components and display the results (see the section
"Diags").
To configure your HP LCD:
1. Ensure that your Personal Workstation's power cord is connected to a
grounded outlet. In this state, your Personal Workstation's hardware
management chip is active, even if your system is not powered on.
Chapter 3
Troubleshooting Your Personal Workstation
Using HP MaxiLife to Diagnose Problems
Run-Time Error Messages
Description of what to do
Run-time Error 2
Check that the fan in the CPU bay area is
working.
Check that the fan in the I/O bay area is
working.
Check that the fan in the CPU bay area is
working.
POST error
Wait for the last POST error message and
press ↵. You can step through the error codes
until you find the one that matches yours. A
description of the error and what to do will be
given.
157
Advertisement
Table of Contents
