Troubleshooting Your Personal Workstation
Using HP MaxiLife to Diagnose Problems
Diags
If your Personal Workstation is powered off when Diags is selected, the
LCD displays a second menu.
To view the test results for each system component, press the
button.
The following table shows the messages that will be in the LCD if a test
passes and if a test fails. The Component part of these displays will be
filled in with the test component messages from Table 3-8.
Table 3-8
160
Test Ok
Component
Next
Test Component Messages
Proc slot1 issue
BIOS
VCC CPU 2 error
Power supply
Test failed
Component
Error
Next
Socket Proc 1
Socket Proc 2
RAM error
Vcache L2 error
Chapter 3
control