8.2.10 General Reader Feedback Parameters; 8.2.11 Setup Default Agc Mode - Leuze electronic DCR 40 Original Operating Instructions

Code Description
Echo option
Raw Command Enable

8.2.10 General reader feedback parameters

Code Description
Get All Reader Feedback
Parameters
Good Read Indication – Fre-
quency (Hz)
Good Read Indication –
Beep Volume (percent)
Good Read Indication –
Beep As IO

8.2.11 Setup default AGC mode

Code Description
Get All Scene Manager Pa-
rameters
Scene Manager Mode
Leuze electronic
Command Format Op-
tions
FW CM S/P/R/ OE 0
G
FW CM S/P/R/ OR 0
G
Command Format Op-
tions
FB FB G
FB GR S/P/R/ FQ 2400
G
FB GR S/P/R/ VO 100
G
FB GR S/P/R/ BI
G
Command Format Op-
tions
SC SC G
SC SP S/P/R/ MO NO
G
DCR 40
De- Notes/Examples
fault
0 Disable Raw Command Echoing
Example: FWCMSOE0
1 Enable Raw Command Echoing
Example: FWCMSOE1
0 Disable Raw Commands
Example: FWCMSOR0
1 Enable Raw commands
Example: FWCMSOR1
Default Notes/Examples
Returns all Reader Feedback parameter
values in an XML element.
Example: FBFBG
Good read beep output frequency.
Valid Range:
Example: FBGRSFQ2400
Valid Range: 0 to 100 percent
Example: FBGRSVO100
0 0 Good Read Indication is a fre-
quency output as defined by FB-
GRGFQ
Example: FBGRSBI0
1 Good Read Indication is an IO
signal
Example: FBGRSBI1
Default Notes/Examples
Returns all Scene Manager parameter
values in an XML element.
Example: SCSCG
NO Normal AGC Mode
Example: SCSPSMONO
BY Bypass AGC Mode
Example: SCSPSMOBY
FX Fixed AGC Mode
Example: SCSPSMOFX
Configuration control
54