Diagnosis / Terminal - Leuze electronic DCR 40 Original Operating Instructions

Select the desired baud rate, the stop bits, the data bits, the parity and various transmission modes here.
The desired acknowledgment settings are also to be set in this selection window.
6.5.4

Diagnosis / Terminal

Fig. 6.7: Terminal
The Terminal tab provides the following functions:
• Send online commands to the scan engine for diagnostic purposes.
• Visualize the output of the scan engine.
The contents of the terminal display can be printed out or saved in a file for subsequent offline evaluation.
Leuze electronic
Configuration and diagnostics software - Sensor Studio
DCR 40 23