Leuze electronic DCR 40 Original Operating Instructions page 28

Code Description
Code 11 – Checksum
Off / 1-digit / 2-digit
Code 11 – Checksum
Characters On/Off
Code 32
Code 39 – Get All Pa-
rameter
Code 39
Code 39 – Checksum
Off/On/On Strip Check
Character
Code 39 – Extended
ASCII On/Off
Leuze electronic
Command Format Op-
tions
SY CO1 S/P/R/ CS
1 G
SY CO1 S/P/R/ SC
1 G
SY CO3 S/P/R/ EN
2 G
SY CO3 G
9
SY CO3 S/P/R/ EN
9 G
SY C039 S/P/R/ CS
G
SY CO3 S/P/R/ EA
9 G
DCR 40
De- Notes/Examples
fault
2 0 Decode with checksum disabled
Example: SYCO11SCS0
1 Decode with one checksum digits
checked.
Example: SYCO11SCS1
2 Decode with two checksum digits
checked.
Example: SYCO11SCS2
Note: This setting value is ignored if
Code 11 decoding is disabled.
0 0 Disable
Example: SYCO11SSC0
1 Enable
Example: SYCO11SSC1
Note: This setting value is ignored if
Code 11 decoding is disabled.
0 0 Disable
Example: SYCO32SEN0
1 Enable
Example: SYCO32SEN1
Returns all Code 39 parameter values in
an XML element.
Example: SYCO39G
1 0 Disable
Example: SYCO39SEN0
1 Enable
Example: SYCO39SEN1
0 0 Disables checksum check & out-
put checksum if one exists
Example: SYCO39SCS0
1 Enables checksum check and out-
put checksum
Example: SYCO39SCS1
2 Enables checksum check and strip
checksum from decode data.
Example: SYCO39SCS2
Note: This setting value is ignored if
Code 39 decoding is disabled.
0 0 Disable
Example: SYCO39SEA0
1 Enable
Example: SYCO39SEA1
Note: This setting value is ignored if
Code 39 decoding is disabled.
Configuration control
29