Table of Contents
Advertisement
8.2.5
Decoder and general decoding parameters
Code Description
Get All Decoder Parameters CD CD
Decoder Timing – Get All
Parameters
Decode Time Limit (ms)
Get All Decoder Operational
Parameters
Maximum Decodes Per
Read
Ensure Region of Interest
Region of Interest Leftmost
pixel
Region of Interest Topmost
pixel
Region of Interest width (pix-
els)
Region of Interest height
(pixels)
Low Contrast 1D
Leuze electronic
Command Format Op-
tions
G
CD DP
CD DT
G
CD DT
S/P/R/
TL
G
CD DT
S/P/R/
TF
G
CD OP
G
CD OP
S/P/R/
PR 1
G
CD OP
S/P/R/
RO 0
G
CD OP
S/P/R/
RL
G
CD OP
S/P/R/
RT 0
G
CD OP
S/P/R/
RW 1280
G
CD OP
S/P/R/
RH 960
G
CD OP
S/P/R/
LC
G
DCR 40
De-
Notes/Examples
fault
Returns all decoder parameter values in
an XML element.
Example: CDCDG
DPM parameters (Not supported)
Returns all decoder timing parameter
values in an XML element.
Example: CDDTG
150/32
Time limit (decoder)
0
Example: CDDTSTL150
30
Timeout Factor
Example: CDDTSTF30
Returns all decoder operational parame-
ter values in an XML element.
Example: CDOPG
The reader will process up to this num-
ber of barcodes per read. If there are
more barcodes in the field of view and
target tolerance, only the first ones will
be decoded.
Valid Range: 1 to 16
Example: CDOPSPR2
0
Disable ROI
Example: CDOPSRO0
1
Enable ROI
Example: CDOPSRO1
Ensure decoded barcoded is always in-
side the region of interest. When dis-
abled, barcode may be decoded as long
as it is partially inside the ROI
0
ROI Left
ROI Top
ROI width
ROI height
0
0
Disable Low Contrast
Example: CDOPSLC0
1
Enable Low Contrast
Example: CDOPSLC1
Configuration control
46
Advertisement
Table of Contents
