Exiting Sensor Studio; Configuration Parameters - Leuze electronic DCR 40 Original Operating Instructions

The current configuration data is displayed in the device manager (DTM).
Fig. 6.2: Configuration project: Sensor Studio device manager (DTM) for DCR 40
Ä The menus of the Sensor Studio device manager (DTM) can be used to change or read out the config-
uration of the connected device.
The user interface of the Sensor Studio device manager (DTM) is largely self-explanatory.
The online help system provides information on the menu items and adjustment parameters. Select the
Help menu item in the menu [?] (
Ä Transfer the modified configuration parameters to the device.
If a connection exists, click on the [Download parameters to device] button (
6.4 Exiting Sensor Studio
After completing the configuration settings, close the Sensor Studio configuration software.
Ä Exit the program via File > Exit.
Ä Save the configuration settings as a configuration project on the PC.
You can open the configuration project again at later time via File > Open or with the Sensor Studio
Project Wizard (
6.5

Configuration parameters

In this chapter, you will find information and explanations on the configuration parameters of the device
manager (DTM).
NOTICE
This chapter does not include a complete description of the Sensor Studio configuration soft-
ware.
Complete information on the FDT frame menu and on the functions in the device manager
(DTM) can be found in the online help system.
Leuze electronic
).
).
Configuration and diagnostics software - Sensor Studio
DCR 40
) on the task bar.
19