Decode Tab - Leuze electronic DCR 40 Original Operating Instructions

Barcode Prefix text
Barcode Suffix text
REGION OF INTEREST (ROI)
ROI Left
ROI Top
ROI Width
ROI Height
6.5.2

Decode tab

Fig. 6.4: Decode tab
SYMBOLOGIES
COMMON DECODE PROPER-
TIES
Leuze electronic
Configuration and diagnostics software - Sensor Studio
Defines text of up to 255 characters that is added before/after the de-
code result.
Allows for setting the region of interest in the image where the labels
are decoded.
Use the ... button to the right of the given code to select the code-spe-
cific settings.
Alternatively, the property settings can be selected directly via the
navigation tree under the Decode button.
The properties can be individually set for each code type.
Maximum labels to decode
The device processes up to this number of codes per read code
event.
• If there are more codes in the field of view and within target toler-
ance and the device is set to decode more than one code, it will
decode all codes in the field of view.
• Set to 1 for fastest performance with single codes.
DCR 40 21