Leuze electronic DCR 40 Original Operating Instructions page 51

Code Description
Reader ID
Hardware Revision
Reader Model Type
Reader Information String
Reader Output Format –
Line Ending
Reader Command –
Process Barcode Data
Reader Command – Reboot RD CM
Reader Command – Post
Event
RDCMX
Reader Command Execute
List
Leuze electronic
Command Format Op-
tions
RD RR G ID
RD RR G HR
RD RR S/P/R/ MT 0
G
RD RR G IS
RD OF S/P/R/ LE
G
RD CM X BD <data> Sends <data> to the host as barcode
X RB 1
RD CM X EV
P1
P2
P3
P4
PL
EV P10
1
P11 P20
P11 P21
EV P10
2
P11
DCR 40
De- Notes/Examples
fault
Returns Reader ID parameter value in
an XML element.
Example: RDRRGID
Returns Reader Hardware Revision pa-
rameter value in an XML element.
Example: RDRRGHR
DCR 50
Example: RDRRSMT6
Returns Reader Information String pa-
rameter value in an XML element.
Example: RDRRGIS
<CR>< Defines the output format line ending.
LF> Non-printable ASCII characters must be
set using URL encoded hex value.
(%0D
%0A) Example: RDOFSLE%0D%0A
data
Example: RDCMXBD12345
Reboots the reader
Example: RDCMXRB1
Posts an event. If the event has param-
eters, it uses P1 and P2. The values for
these parameters are specified after
each parameter.
Example: Posts an event to start a sin-
gle decode RDCMXEV1, P11, P20
(see Reader Command List below)
(see Reader Command List below)
(see Reader Command List below)
(see Reader Command List below)
(see Reader Platform command below)
Stop decoding
Start single decode
Start continuous decoding
Disable Targeting
Enable Targeting
Configuration control
52