Table of Contents
Advertisement
6
Configuration and diagnostics software - Sensor Studio
The Sensor Studio configuration software provides a graphical user interface for the operation, configura-
tion, and diagnosis of the device via the RS 232 interface.
A device that is not connected to the PC can be configured offline.
Configurations can be saved and reopened as projects for transferring back to the device at a later time.
NOTICE
Only use the Sensor Studio configuration software for products manufactured by Leuze elec-
tronic.
The Sensor Studio configuration software is offered in the following languages: German, Eng-
lish, French, Italian and Spanish.
The FDT frame application of the Sensor Studio supports all languages; all languages may not
be supported in the device DTM (Device Type Manager).
The Sensor Studio configuration software is designed according to the FDT/DTM concept:
• You make the individual configuration settings for the scan engine in the Device Type Manager (DTM).
• The individual DTM configurations of a project can be called up via the frame application of the Field
Device Tool (FDT).
• Communication DTM for scan engines: LeCommInterface
• Device DTM for scan engine DCR 40
Procedure for the installation of the software and hardware:
Ä Install the Sensor Studio configuration software on the PC.
Ä Install the communication and device DTMs.
Communication and device DTM are included in the LeAnalysisCollectionSetup installation package.
Ä Create DCR 40-DTM in the project tree of the Sensor Studio FDT frame.
Ä Connect scan engine to PC (see chapter 5.4 "PC or terminal connection").
6.1
System requirements
To use the Sensor Studio configuration software, you need a PC or laptop with the following specifications:
Tab. 6.1:
System requirements for Sensor Studio installation
Operating system
Computer
Graphics card
Required hard disk capacity for
Sensor Studio and communica-
tion DTM
NOTICE
Administrator privileges on the PC are necessary for installing Sensor Studio.
Leuze electronic
Configuration and diagnostics software - Sensor Studio
Windows XP or higher (32 bit, 64 bit)
Windows Vista
Windows 7
Windows 8
Processor type: 1 GHz or higher
Serial COM interface
CD-ROM drive
Main memory (RAM): at least 64 MB
Keyboard and mouse or touchpad
At least 1024 x 768 pixels
35 MB
DCR 40
16
Advertisement
Table of Contents
