Control Tab - Leuze electronic DCR 40 Original Operating Instructions

The device manager (DTM) of the Sensor Studio configuration software offers the following configuration
functions:
• General (Control)
• Decode (see chapter 6.5.2 "Decode tab")
• Communications (see chapter 6.5.3 "Communications tab")
• Diagnosis (see chapter 6.5.4 "Diagnosis / Terminal")
NOTICE
The online help system displays information on the menu items and configuration parameters
for each function. Select the Help menu item in the menu [?].
6.5.1

Control tab

Fig. 6.3: Control tab
SCAN OPTIONS
Maximum labels to decode
Targeting
DECODE OUTPUT OPTIONS
Output Result with AIM ID
Barcode Prefix / Suffix enabled
Leuze electronic
Configuration and diagnostics software - Sensor Studio
The device processes up to this number of codes per read code
event.
• If there are more codes in the field of view and within target toler-
ance and the device is set to decode more than one code, it will
decode all codes in the field of view.
• Set to 1 for fastest performance with single codes.
Switch the blue targeting LED on and off.
Allows for the output of the AIM symbology identifier with the decode
result.
Enables/ disables the output of prefix and suffix text with the decode
result.
DCR 40 20