General Reader Information - Leuze electronic DCR 40 Original Operating Instructions

Code Description
Sleep Mode Timer – Main-
tain Connection
Power Mode Enter Sleep
8.2.7

General reader information

Code Description
Get All Reader Information
Parameters
Get all Firmware information RD FW
Firmware Version Major
Firmware Version Minor
Firmware Version Build Ver-
sion
Decoder Version
Chip Revision
Reader Serial Number
Reader Information
Leuze electronic
Command Format Op-
tions
PM SM S/P/R/ MC 1
G
PM ES
Command Format Op-
tions
RD RD G
G
RD FW G MJ
RD FW G MN
RD FW G BU
RD FW G DV
RD CP G RV
RD CP G SN
RD RR G
DCR 40
De- Notes/Examples
fault
0 Disconnect from host in Sleep
Mode
Example: PMSMSMC0
1 Retain connection in Sleep
Mode
Example: PMSMSMC1
Forces the device to go into Sleep Mode
even if Standby Mode Timer and Sleep
Mode Timer are disabled. This com-
mand should be sent as RAW. The de-
vice will immediately go into Sleep Mode
after receiving this command.
Example: PMES
De- Notes/Examples
fault
Returns all Reader Information parame-
ter values in an XML element.
Example: RDRDG
Returns all Firmware parameter values
in an XML element.
Example: RDFWG
Returns Firmware Major Version param-
eter value in an XML element.
Example: RDFWGMJ
Returns Firmware Minor Version param-
eter value in an XML element.
Example: RDFWGMN
Returns Firmware Build Version param-
eter value in an XML element.
Example: RDFWGBU
Returns Decoder version parameter
value in an XML element.
Example: RDFWGDV
Returns Chip Revision parameter value
in an XML element
Example: RDCPGRV
Returns Reader Serial Number parame-
ter value in an XML element
Example: RDCPGSN
Returns Reader Information parameter
value in an XML element
Example: RDRRG
Configuration control
51