Connecting Wp820 To Wi-Fi Network - Grandstream Networks WP820 Administration Manual

● Account: Configure/View SIP accounts settings and account ringtone.
● Call settings: Configure the account auto answer, call forward, DND and speed dial settings.
● Network Settings: Configure the networks settings including Wi-Fi settings and additional networks
settings.
● Bluetooth Settings: Configure the Bluetooth settings including discovery, pairing and connection
actions.
● Basic Settings: Configure the basic settings including voice settings, display settings, Gestures and
button customization, language settings and date/time settings.
● Advanced Settings: Configure the advanced settings including system upgrade, PTT/Paging settings,
system security settings, syslog settings and factory reset / reboot.
● Alarm Clock: Configures the alarm clock settings
Applications
● Calculator: performs arithmetic operations on numbers.
Broadsoft XSI Broadsoft account.
Displays account status, system info, Network status and network statistics
● Account status
● System Info: Press to enter the sub menu for Running memory, Storage status, MAC address, System
version, Recovery version, U-boot version, Kernel version, Hardware version, PN number, Country code
and Running time.
Status
● Network status: Press to enter the sub menu for MAC address, IP setting information (DHCP/Static IP),
IPv4 address, IPv6 address, Subnet Mask, Gateway, DNS server.
● Network Statistics: Press to enter the sub menu for Network SSID, BSSID, IP address, Signal strength,
Connection speed, Channel, Frequency, Tx packets, Tx error packets, Tx error rate, Tx drop packets, Tx
drop rate, Rx packets, Rx error packets, Rx error rate, Rx drop packets, Rx drop rate.
● Battery: Displays the battery status and the battery usage details.

Connecting WP820 to Wi-Fi network

The WP820 supports dual-band 802.11a/b/g/n Wi-Fi, please refer to the following steps in order to connect your WP820 to
the Wi-Fi networks:
1. On LCD menu, press Menu key and navigate to Settings → Network Settings → Wi–Fi.
2. Set Wi-Fi to "On" and navigate to "Wi-Fi Settings". A list of Wi-Fi networks will be displayed.
3. Select the desired network to connect to. (Enter the correct password to connect if requested).
WP820 will display Wi-Fi icon on the main LCD menu if the con nection to the Wi-Fi network is successful.
Note:
If 5GHz and 2.4Ghz are both available, the WP820 will use 5GHz, but it may switch to 2.4GHz if the signal of 5GHz is poor. Users
may also specify the Wi-Fi Band in order to fix it or to keep it Dual Band.
Figure 7: WP820 Menu Structure
Figure 6: Wi-Fi Settings