Maintenance Intervals - Terex PT-110 F Operation And Maintenance Manual

7 MAINTENANCE

7.3 Maintenance Intervals

7.3-1 Daily Maintenance Tasks
Daily
1 Check hydraulic oil level (figure 7.7-3, p-82)
2 Check engine oil level
3 Check fuel level (gauge on instrument panel)
4 Check alternator / A/C belt tension / condition
5 Check track tension / condition
6 Check for proper control operation
7 Check for proper switch and lighting operation
8 Check / clean air cleaner elements
9 General visual check for cracks, damage, completeness
10 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc.
11 Drain water separator
12 Lubricate all grease points
13 Inspect / clean the coolers and engine compartment
14 Inspect / clean undercarriages (as needed)
15 Inspect / clean chassis
16 Inspect/replace missing/damaged safety signs
7.3-2 50-1000 hour Tasks
Every 50 operating hours
1 Inspect drive sprocket rollers (replace as needed)
Every 250 operating hours
1 Replace engine oil & filter
2 Replace hydraulic filter(s)
3 Replace planetary oil (initial change only)
Every 500 operating hours
1 Replace fuel filter element
2 Replace planetary oil (normal change interval after initial change)
Every 1000 operating hours
1 Replace hydraulic oil
2 Replace engine coolant (use SCA additive, see engine manual)
PT-110/PT-110F US O&M
2095-479 2013-02
78
Page
82
80
37
83
85
40
37
88,89
20,61
18,27,61
84
79
90-91
85
91
12,13
Page
87
Page
81
83
86
Page
84
86
Page
82
90