Air Cleaner - Terex PT-110 F Operation And Maintenance Manual

7 MAINTENANCE
7.17 Air Cleaner Removal / Inspection
7.17-1
red
7.17-4
A properly functioning air cleaner is necessary to ensure performance and to pro-
long engine life. Inspect the dust load indicator daily. It is located inside the left
lift arm tower, visible through an opening just below the lift arm when looking
rearward at the front of the tower (fig. 7.17-4). If red is visible on the indicator,
the air cleaner must be serviced (see notice in this section).
To service the air cleaner:
1. Shut the machine down as described in section 5.13, then open the hood
and lower the left side panel to uncover the air cleaner housed in the left
loader tower.
2. Lift the latches (1) on the air cleaner canister to release the cover, pull to
remove.
3. Immediately vacuum the inside of the canister to remove loose dirt.
4. Once any dirt particles have been removed, slowly remove the primary
element (2) taking care not to disturb dirt that may be caked around the
filter seal. Again vacuum the canister.
5. Wipe the seal areas with a clean damp cloth to remove any remaining dirt.
PT-110/PT-110F US O&M
2095-479 2013-02
1
7.17-2
7.17-3
88
2
3