Emergency Exits - Terex PT-110 F Operation And Maintenance Manual

4.12 Emergency Exits

1
1
Familiarize yourself with the emergency exits and
associated features located in the cab enclosure
prior to operation. These features allow an operator
to escape from the cab in an emergency.
Standard Operator Escape (door and rear window
exit) Firmly grasp the triangular tag attached to the
molding on either the door window or rear window.
Pull on the tag forcefully to remove the window molding, then push or kick the
window out to escape (fig. 4.12-3).
Forestry Operator Escape (door exit): Firmly grasp the red levers attached to the
left side of the door opening. Turn both levers counter-clockwise to release the
door from its hinges. Press down on the door latch lever to release it from the
cab, then forcefully push or kick the door off of the hinges to escape (fig. 4.12-1).
Forestry Operator Escape (rear window exit): Lift the clamp levers located on
each side of the rear window upward to release the window assembly from the
cab. Push or kick the window out forcefully to escape (fig. 4.12-2).
4 MACHINE DESCRIPTION / CONTROLS
2 3
2
57
4
4.12-1
2076-411
3
4.12-2
2076-212
4.12-3
PT-110/PT-110F US O&M
2095-479 2013-02