Maintenance Intervals - Terex R190T-ROW Operation And Maintenance Manual

7 MAINTENANCE

7.3 Maintenance Intervals

7.3-1 Daily Maintenance Tasks
Daily
1 Check hydraulic oil level (figure 7.7-3, p-68)
2 Check engine oil level
3 Check fuel level (gauge on instrument panel)
4 Check fan belt tension / condition
5 Check track tension / condition
6 Check for proper control operation
7 Chech safety circuit for proper operation
8 Check for proper switch and lighting operation
9 Inspect air cleaner elements
10 General visual check for cracks, damage, completeness
11 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc.
12 Drain water separator
13 Lubricate all grease points
14 Inspect / clean the radiator/cooler and engine compartment
7.3-2 50-1000 hour Tasks
Every 50 operating hours
1 Inspect drive sprocket rollers (replace as needed)
Every 250 operating hours
1 Replace engine oil & filter
2 Replace hydraulic filter(s)
3 Replace Planetary Oil (initial change only)
Every 500 operating hours
1 Replace fuel filter element
2 Replace Planetary Oil (normal change interval after initial change)
Every 1000 operating hours
1 Replace hydraulic oil
2 Replace engine coolant (use SCA additive, see engine manual)
RT-60/R160T/R190T ROW O&M
0404-659 2016-05
64
Page
68
66
37
69
71
40
47
37
74
20,47
18,27,47
70
65
76-77
Page
73
Page
67
69
82
Page
70
82
Page
68
76