Maintenance Intervals - Terex R190T Operation And Maintenance Manual

7 MAINTENANCE

7.3 Maintenance Intervals

7.3-1 Daily Maintenance Tasks
Daily
1 Check hydraulic oil level (figure 7.7-3, p-68)
2 Check engine oil level
3 Check fuel level (gauge on instrument panel)
4 Check fan belt tension / condition
5 Check track tension / condition
6 Check for proper control operation
7 Check for proper switch and lighting operation
8 Check / clean air cleaner elements
9 General visual check for cracks, damage, completeness
10 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc.
11 Drain water separator
12 Lubricate all grease points
13 Inspect / clean the radiator/cooler and engine compartment
7.3-2 50-1000 hour Tasks
Every 50 operating hours
1 Inspect drive sprocket rollers (replace as needed)
Every 250 operating hours
1 Replace engine oil & filter
2 Replace hydraulic filter(s)
Every 500 operating hours
1 Replace fuel filter element
Every 1000 operating hours
1 Replace hydraulic oil
2 Replace engine coolant (use SCA additive, see engine manual)
R160T / R190T US O&M
0404-490 2014-06
64
Page
68
66
37
69
71
40
37
74
20,47
18,27,47
70
65
76-77
Page
73
Page
67
69
Page
70
Page
68
76