Terex PT-110 F Operation And Maintenance Manual page 52

Auto Idle
Adjust
This screen allows you to enable or disable the Auto Idle feature.
To enable or disable this feature, press the button beneath the check mark. Then
use the buttons beneath the arrows to toggle between the settings until your
desired setting is displayed, then confirm your selection by pressing the button
beneath the check mark again.
High Flow
45 GPM
Adjust
This screen allows you to change the flow rate for the high flow auxiliary
hydraulic circuit.
To change the flow in GPM, press the button beneath the check mark. Then use
the buttons beneath the arrows to raise or lower the value until your desired flow
rate is displayed, then confirm your selection by pressing the button beneath the
check mark again.
4 MACHINE DESCRIPTION / CONTROLS
Auto Idle
Enable
High Flow
51
PT-110/PT-110F US O&M
2095-479 2013-02