Downloading The Snmp Mib Files; Restoring Factory Default Settings - Christie TruLife+ Griffyn 4K32-RGB User Manual

c) To confirm the address, select Enter.
d) To add a second and third IP address, repeat steps a to c for Address 2 and Address 3.
3. From the web interface:
a) For Address 1, select Edit.
b) Enter the IP address.
c) Select Apply.
d) To add a second and third IP address, repeat steps a to c for Address 2 and Address 3.

Downloading the SNMP MIB files

The SNMP management information base (MBI) files describe the data format used by SNMP.
1. Select MENU > Communications > SNMP.
2. To download the SNMP MIB files, select Download File.
The files are downloaded to the default location on the computer.

Restoring factory default settings

Restoring factory settings removes all custom device settings.
Only Christie qualified technicians can reset factory defaults.
1. From the display panel, select MENU > Admin > Service.
2. Enter the service password.
The password is only required for the display panel and not the web user interface.
3. Select Reset Factory Defaults.
All customized settings are set to the default factory settings.
4. At the confirmation prompt, select Reset.
Christie TruLife+ User Guide
020-103315-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Diagnostic tools
59