Yamaha XVS950CU 2014 Service Manual page 68

Item
Front wheel sensor bolt (for ABS
models)
Rear wheel sensor bolt (for ABS
models)
Rear wheel sensor lead holder
bolt (for ABS models)
Hydraulic unit assembly union
bolt (for ABS models)
Hydraulic unit assembly lower
bracket bolt (for ABS models)
Hydraulic unit assembly and
bracket holding nut
Hydraulic unit assembly bolt (for
ABS models)
Damper holder and hydraulic unit
assembly upper bracket bolt
TIP
Fuel pump bolt
Tighten the fuel pump bolts in the proper tightening sequence as shown in the illustration.
TIP
Front wheel axle pinch bolt
1. Insert the front wheel axle from the right side and tighten it to 59 Nm (5.9 m·kgf, 43 ft·lbf).
2. In the order pinch bolt "1" → pinch bolt "2" → pinch bolt "1", tighten each bolt to 20 Nm (2.0 m·kgf,
14 ft·lbf) without performing temporary tightening.
Thread
Q'ty
size
M6 1
M6 1
M6 1
M10 4
M8 3
M8 3
M6 3
M6 3
3
1
2 1
2-25
TIGHTENING TORQUES
Tightening torque
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
30 Nm (3.0 m·kgf, 22 ft·lbf)
23 Nm (2.3 m·kgf, 17 ft·lbf)
16 Nm (1.6 m·kgf, 12 ft·lbf)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
4
Remarks