Yamaha XVS950CU 2014 Service Manual page 133

1. Brake pipe/hose assembly (front brake master
cylinder to hydraulic unit)
2. Front wheel sensor lead
A. Route the brake pipe/hose assembly (front brake
master cylinder to hydraulic unit) through the cable
guide.
B. Route the brake pipe/hose assembly (front brake
master cylinder to hydraulic unit) between the front
fork and the pipe section of the lower bracket.
C. Fasten the grommet on the brake pipe/hose
assembly (front brake master cylinder to hydraulic
unit) with the front brake hose holder.
– °
D. 20 40
CABLE ROUTING (for ABS models)
2-90