Yamaha XVS950CU 2014 Service Manual page 117

1. Crankcase breather hose
2. Crankcase
3. Air filter case
A. Install the crankcase breather hose with its white
paint mark facing upward.
B. Point the ends of the hose clamp rearward, angled
upward.
C. Route the crankcase breather hose over the timing
chain tensioner.
D. Point the ends of the hose clamp rearward.
E. Align the hose clamp with the yellow paint mark on
the crankcase breather hose.
F. Install the crankcase breather hose completely
onto the hose joint, making sure that the yellow
paint mark on the hose is facing upward.
G. Yellow paint mark
H. Align the hose clamp with the white paint mark on
the crankcase breather hose.
I. Install the crankcase breather hose onto the hose
fitting of the air filter case, making sure that the
hose contacts the case.
CABLE ROUTING (except for ABS models)
2-74